Most Common Hacks to Fix Wavlink Extender Not Working Issue
The Wavlink extender not working issue has been troubling a lot of users these days. In case you are one of them, then you have come to the right blog. Here, not only have we talked about what might have caused the issue at hand but also the solutions to help you get rid of it. With that said, you ought to continue reading this guide.
[Fixed] Wavlink Extender Not Working Issue
Reason 1: Improper Power Supply
The number one reason why you are stuck with the Wavlink extender not working issue is because your networking device is not getting an adequate power supply from its wall socket. Do you know why this might be happening? Well, because either the power cable or the wall socket is damaged.
Solution 1: Supply Proper Power
To take care of the problem, it is recommended that you ensure a stable power supply to your Wavlink wireless range extender. And this is only possible if you are using a wall socket free of damage. In case, this hack refuses to work for you, then you should not waste any more time plugging your device into another wall socket.
Reason 2: Damaged Ethernet Cable
The condition of the Ethernet cable decides how strong the connection between the Wavlink range extender and the host router is. In case, the Ethernet cable is worn out, then it is no shocker why your extender is not working for you. But, there is no point in regretting now. What matters is the solution to resolve the issue.
Solution 2: Replace Existing Cable
In order to eliminate the second reason behind the issue at hand, you need to replace the existing Ethernet cable. As soon as you get a new cable home, connect the networking devices with its aid. Make sure that the connection you are establishing is finger-tight. We are suggesting this little tip so that you do not face more issues in the future.
Reason 3: Signal Interference
Mirrors and fish tanks are examples of reflexive surfaces. If they have been kept in the same room where the extender was placed by you during the Wavlink extender setup process, then it might have caused signal interference. How? The signals emitted from your extender would have bounced off of the surfaces thereby preventing signal transmission.
Solution 3: Relocate Wavlink Extender
You should consider changing the location of your Wavlink wireless range extender. See to it that it is not kept near mirrors, fish tanks, and other similar reflexive surfaces. Apart from this, avoid placing your device near treadmills, televisions, microwave ovens, refrigerators, cordless phones, washing machines, baby monitors, etc.
Reason 4: Improper Extender Setup
Considering you are still experiencing the Wavlink extender not working issue, it might be because you have not set up your networking device properly. Either you messed up while following the instructions or did not take the necessary precautions to achieve Wavlink extender setup process.
Solution 4: Setup Extender Again
To make your extender work this time once and for all, it is recommended that you set it up from scratch. This can be done using two setup methods. The first method requires you to press the WPS button on the extender as well as the router whereas the second method requires you to make your way to the web user interface.
In this manner, you will be able to troubleshoot the Wavlink extender not working issue. In case you still are facing it and do not have the energy to search for more troubleshooting content on the web, then getting in touch with our team of professionals will be a great decision. Thus, without any further ado, contact them now.
Also, if you are planning to use the Wavlink extender in the long run, then chances are that you might get stuck with issues every now and then considering it is a technical device. In this case, our advice would be that you keep visiting this website often. Here you will every bit of information needed to resolve extender-related issues.