How to Fix Wavlink Blinking Red Light Issue?
Wavlink is one of the best and leading companies around the world that manufactures premium quality extenders. Their extenders work magnificently and provide blazing-fast internet speed and endless connectivity in every room of the house. But, nowadays, some users report that their Wavlink blinking red light which indicates a problem with the networking device. If you are also sailing in the same boat and looking for a detailed guide to fix the trouble, then you have come to the perfect place.
Here, in this write up we will discuss reasons and some easy ways to fix this red light issue on the Wavlink extender. So keep reading!
Reasons: Wavlink Blinking Red Light
Here we discuss some reasons with you so that you can understand properly why your Wavlink extender blinking red frequently.
Technical Glitches
The very first reason is technical glitches. This happens when users do the over usage of extender without giving the rest.
Improper Power Supply
To get the best result from the device it should be connected to the working wall outlet which supplies the proper electricity. If you use the damaged or faulty socket then the extender blinks red light.
Excessive Distance Between Devices
The precise location where WiFi extenders are placed is important because being too far from routers can cause loss of internet connectivity.
WiFi Interference
Wireless interference also could be the reason behind red light because it weakens the signal strength of the device.
Corrupted & Outdated Firmware
Outdated firmware does not support the functions and features of the networking device. Plus, it puts the device at higher risk.
That’s all about the contributing factors behind Wavlink blinking red light issue. You can fix this by implementing effective and quick hacks.
Fix: Wavlink Blinking Red Light Issue
Reboot the Extender
Whenever the LED light on the Wavlink extender blinks red, the first thing you have to do is reboot the device. Because rebooting process handles minor configuration errors.
Moreover, you can also remove the technical glitches from the extender which occur due to over-usage. Below we mentioned all the instructions to restart the process perfectly.
- Turn off the extender and remove the power cable from the wall outlet.
- Wait for a couple of minutes.
- Thereafter, you have to plug the extender back into the socket.
Now, turn on the device and take a look at the extender to ensure the red light goes off or not. If yes then congrats! If not then, move to the next possible solutions.
Update Firmware
Although the Wavlink extender has been designed with an automatic update option. But, sometimes it’s not updated due to some possible reasons. So, we advise you to check the firmware version by accessing the Wavlink extender login page. If you found an old version of firmware, then update it at the same time to fix the Wavlink blinking red light issue.
Check the Wires and Cables
Now, you need to take a small check on the wires and cables of the extender and router to ensure they work properly or not. Because worn out cables cause many issues with the networking device.
So, to check the cable you need to ensure that all the cables are properly inserted into the networking device. There should not be a loose connection of cables.
The power and Ethernet cable should not be damaged and worn out because it is not good for the device.
Remove the Wireless Interference
If you are still in the same situation then remove the wireless interference. To do this you can follow the following points:
- Do not put the metal objects near the Wavlink extender.
- Keep the home appliances away from the networking device.
- Try to place the extender on the shelf to get a better internet speed.
Bottom Lines
We hope this write-up assists you to fix the Wavlink blinking red light issue in a hassle-free manner. You just need to follow the hacks as mentioned. In case you are not able to fix the trouble then you can reach out to our team for instant assistance.